Alarms - Honeywell touchpoint Pro Operating Instructions Manual

MAN0923_Issue 3_04/15

7.4 Alarms

Des résultats dépassant considérablement l'échelle peuvent être indicateurs d'une
7.4.1 View active alarms
Active alarms can be viewed in three ways:
1. From the System Status screen, select the flashing red bell Alarm icon
2. From the System Status screen navigation bar, select the Active Events icon, then the Filter icon and
select Alarm from the popup menu
3. From the System Status screen navigation bar, select the Inputs icon, then the Filter icon and select
Alarm from the popup menu
The screen will display a list of all input channels with active Alarms, starting with the most recent event.
Unacknowledged alarms will flash, acknowledged ones will be solid
Note: the display will show the channel ID, location tag and the time of the alarm. If more than one alarm
level has been triggered on the same channel, all alarm levels will be shown.
7. Normal Operation
High 'off-scale' readings may indicate an explosive concentration.
AVERTISSEMENT
concentration explosive.
Figure 7.10 Active Events Screen with filter options
WARNING
100
Touchpoint Pro
Operating Instructions