Overview / Introduction - Honeywell touchpoint Pro Operating Instructions Manual

MAN0923_Issue 3_04/15

2. Overview / Introduction

2.1 Touchpoint Pro
Touchpoint Pro is a control system for Honeywell Analytics' (and third party) range of sensors, which
provides alarm evaluation and logically connectable relay outputs for alarm annunciation or control
equipment operation.
Any system can be built from just four main building blocks:
1. A control module with colour LCD touch screen User Interface
2. Plug-in Input / Output (I/O) modules
3. A backplane power and communications highway
4. Power Supplies
These basic components can be mounted in cabinets or racks (or a combination) and the I/O modules
freely mixed and matched in any combination. From small-scale systems to large fully integrated gas, fire
and shutdown systems, Touchpoint Pro has the flexibility to meet all your gas and fire safety system control
requirements.
The heart of Touchpoint Pro is the Controller, which includes the User Interface. The User Interface features
a full colour liquid crystal display (LCD) with touch screen, and provides engineers with an intuitive solution
to system set-up and deployment.
Touchpoint Pro System Key Components
Remote Unit
2
Input and Output Modules
mV and mA Relay Output Digital Input
Analogue Module Module
Input Modules
1
Controller with User Interface
3
Communication / Power Rail
Figure 2.1 Touchpoint Pro system overview
19
Touchpoint Pro
Operating Instructions
Remote Unit
4
Power Supply Units
120W 24 Vdc 240W 24 Vdc 480W 24 Vdc
PSU PSU PSU
Redundancy UPS
Module Module