Control Module And User Interface - Honeywell touchpoint Pro Operating Instructions Manual

MAN0923_Issue 3_04/15

10.5 Control Module and User Interface

10.5.1 Controller & Remote Unit DC Input Supply
Input Voltage
DC Input Voltage Range
10.5.2 Control Module and User Interface
Description
Supply Voltage
Power Consumption
Ring Communication Physical layer
Ring Network Cable
Relay Outputs
Relay Contacts
Interfaces
Panel Dimension
Retention of Real Time Clock
10.6 I/O Modules
10.6.1 Common Specifications
Dimensions
Installation
Maximum wire size
IP Rating
EMC
Power supply
DIN rail compatibility
Casing material
Operating Temperature Range
Storage Conditions
Operating Humidity Range
Weight
Environmental Protection Class
10. Specifications
DC 24 V (nominal)
18 – 32 VDC (Supplied from Self Enclosed Low Voltage source only)
Front panel User Interface Assembly
18 – 32 VDC (Supplied from Self Enclosed Low Voltage source only)
Maximum 13 W
Isolated RS485
Two x 1 mm twisted pair cable
2
Two x System State Relays
Min. 12 VDC, 10 mA
Max. 5 A at 250 VAC / 30 VDC (non–inductive)
5.7 inch, 320 x 240 pixels (QVGA), Touch Screen LCD
LED and Button Panel with LEDs for Power, Alarm and Fault indication. Buttons for Accept and Reset
functions
Buzzer for audio indication of Alarm/Faults (Sound Level: 85 dB at 100 mm)
USB 2.0 Device Interface with standard Type B USB connector to interface with PC/Laptop for
configuration. Supports USB memory device up to 32 Gb
Standard SD Card Interface 4 Gb to 32 Gb. Supports 24 mm x 32 mm x 2.1 mm cards
10/100 Mbps Ethernet Interface with standard RJ–45 connector
Two x RS–485 Modbus connections supporting maximum 115.2 kbps
483 mm x 222 mm
24 hours unpowered
35.0 mm x 99.5 mm x 114.5 mm (W x H x D)
5, 7, 9 or 10-way Communication / Power Rail
2.5 mm 2
IP20
EN 50270
18 – 32 VDC (Supplied from Self Enclosed Low Voltage source only)
TS–35 / 15
Polyamide PA 6.6 V0 (UL94)
–40 °C to +70 °C
–40 °C to +70 °C
10 to 90 %RH (non–condensing)
210 g
Equipment Class III, Installation Cat 2, Pollution Degree 2
152
Touchpoint Pro
Operating Instructions