MAN0923_Issue 3_04/15
3. Mechanical Installation
3.4 Floor Standing Enclosures
Caution: The Touchpoint Pro enclosure is heavy (refer to table of typical weights). Before lifting the
enclosure, consider and implement control measures to reduce the risk of injury. Refer to local safety
regulations.
Caution: To prevent the floor standing enclosure toppling over, it must be mechanically secured in
place, either bolted through the plinth to the floor, or bolted to a suitable wall structure.
Caution: Do not block any vents if fitted
The typical weights of the floor standing enclosures are shown in the table below. Please be aware that the
weight may vary depending on the options selected.
Description
FS cabinet 2000 x 800 x 600 Front Access No ventilation
FS cabinet 2000 x 800 x 600 Front Access Natural ventilation
FS cabinet 2000 x 800 x 600 Front Access Forced ventilation
FS cabinet 2000 x 800 x 600 Rear Access No ventilation
FS cabinet 2000 x 800 x 600 Rear Access Natural ventilation
FS cabinet 2000 x 800 x 600 Rear Access Forced ventilation
Approximate
Weight in kg
32
Touchpoint Pro
Operating Instructions
201
201
201
201
201
201