View Event History - Honeywell touchpoint Pro Operating Instructions Manual

MAN0923_Issue 3_04/15

7.10 View Event History

The event history for the complete system can be viewed in date order (latest first). The history can be
filtered by Alarm, Fault, Inhibit, Warning, All or by selecting a date range.
To access event history, from the System Status screen navigation bar select Extras, then Event History
or in the Web Server directly select the Event History icon.
Note: The event history time stamp is accurate to within 5 seconds.
Note: Touchpoint Pro does not adjust automatically for daylight savings time. Be aware that if the date and
time are changed to a time in the past, (for example ending daylight savings time) Touchpoint Pro will retain
a backup of the previous data.
7.11 Generate Reports
Several reports can be generated from the Touchpoint Pro system. Reports can be saved to a memory
device or printed. The report is generated as a Comma Separated Value (.csv) file.
• Trending for a specific channel, date range is selectable
• Channel events for a specific channel, date range is selectable
• Configuration for a specific channel
• All events within a selectable date range
• Calibration Report
• System Configuration Report
To access reports:
1. From the System Status screen navigation bar select Extras, then Report
2. Select the type of report required, and if applicable select the channel required
Note: The Save/Print option is disabled until a channel is selected.
3. Select required start and end dates and times
4. Select Save or Print as required
Note: The Web Server will automatically open the report in Microsoft Excel (if installed) or in a text editor.
Microsoft Excel 2003 is limited to a maximum of 65,526 entries. If the report is larger than this a message
"file not loaded completely" may be generated. Microsoft Excel 2010 has a much larger capacity which
should be sufficient for all Touchpoint Pro generated reports.
Note: Touchpoint Pro does not adjust automatically for daylight savings time. Be aware that if the date and
time are changed to a time in the past, (for example ending daylight savings time) Touchpoint Pro will retain
a backup of the previous data.
7. Normal Operation
108
Touchpoint Pro
Operating Instructions