Navigation - Active Access Level Icons; Alarms; View Active Alarms - Honeywell Touchpoint Plus Wireless Technical Handbook

MAN0984_Iss 2_09/19
3020M5001_2
6.5.4 Navigation – Active Access Level Icons
You must enter a valid password to login.
Note: The system will log out after 15 minutes of inactivity. User can adjust the timeout interval

6.6 Alarms

6.6.1 View active alarms

Active alarms can be viewed:
1) From the Input screen, select the red filter icon:
The screen will display a list of the input channels with active Alarms, starting with the most recent event.
Unacknowledged alarms will flash, acknowledged ones will be stay on. Touch the Accept button to
acknowledge the alarms.
Note: the display will show the channel ID, location tag. If more than one alarm level has been triggered on
the same channel, a high priority alarm levels will be shown.
Operating Instructions
No one is logged in
Operator is logged in
Service engineer is logged in
Administrator is logged in
50
Touchpoint Plus Wireless
Technical Handbook