Honeywell touchpoint Pro Operating Instructions Manual page 121

MAN0923_Issue 3_04/15
5. Highlight each channel in turn and select "Decommission" from the popup menu
6. Once all channels are decommissioned. highlight the module and select Remove Module from the
popup menu
7. If still connected, disconnect the field equipment from the faulty module, by unplugging the field
terminals
8. Remove the faulty module from the Communication / Power Rail
• Release the clip at the bottom of the module
• Ease the module outwards and unhook it from the top of the DIN rail
8. Maintenance
Figure 8.6 Detaching the module
121
Touchpoint Pro
Operating Instructions