Buzzer Activation And Button Password Protection - Honeywell touchpoint Pro Operating Instructions Manual

MAN0923_Issue 3_04/15

6.12 Buzzer Activation and Button Password Protection

The Touchpoint Pro buzzer can be configured to determine under which conditions it activates. There is also
a facility to password protect the Accept and Reset buttons on the Touchpoint Pro front panel.
1. If not already logged in, login with a valid administrator level user name
2. From the System Status screen select the Extras icon then System Configuration
3. Re-enter the password and press Login
4. Select CCB Management then CCB Configuration
Access Level: Administrator
Parameter Name
Buzzer Activation
Password Protection for
Accept Button
Password Protection for
Reset Button
6.13 Touch Panel Configuration
To access the panel configuration:
1. If not already logged in, login with a valid engineer level user name
2. From the System Status screen select the Extras icon then Global Settings
3. Select Panel Configuration
Access Level: Engineer
Parameter Name Default Setting
Backlight Duration 15 minutes
Purpose of the "Gas Monitoring
System Label System"
6. Commissioning
Default Setting Value Range
Threshold Alarms Only Buzzer Off, Threshold Alarms Only, All
Alarms Only, All Events (All Alarms,
Faults, Inhibits and Warnings)
Disabled Enabled / Disabled
Enabled Enabled / Disabled
Value Range
10 seconds to 60 minutes
/ Always On
30 characters
Comment
This is the time that the backlight will remain on after the
touchscreen is idle.
If a new event occurs, the backlight will come on and will
remain on as long as the event remains unacknowledged
This text is displayed on the System Status screen
87
Touchpoint Pro
Operating Instructions
Comment
Determines the activation condition
for the buzzer
If enabled, Operator level access
is required to acknowledge active
events using the Accept button on the
front panel
If enabled, Operator level access is
required to reset active events using
the Reset button on the front panel