Honeywell touchpoint Pro Operating Instructions Manual page 146

MAN0923_Issue 3_04/15
10.2.2 Wall Mount Remote Unit Enclosures without User Interface
These units are IP 66 Type 4 & 12, Class 1 (grounded), and can be installed indoors or outdoors in a
Pollution Degree 4 environment, and can be exposed to rain, snow and direct sunlight.
a
The upper T may be reduced dependent on internal power dissipation. See Rating Plates for details.
Part Number
Material
Dimensions (H x W x D)
Weight
Operating Conditions
Power Supplies
Pmax
10.2.3 Hazardous Area Remote Unit Enclosure without User Interface
Ne pas ouvrir l'équipement dans des atmosphères contenant des gaz inflammables.
Substitution of components may impair suitability for Class 1 Div.2, Class 1 Zone 2, and
Substituer des composants peut compromettre la conformité de la Classe 1 Div.2, Classe
1 Zone 2, et de la Zone 2 [ATEX] pour l'approbation de produits non inflammables.
Wiring to and from this enclosure must utilise wiring methods suitable for Class 1
Div.2, Class 1 Zone 2, and Zone 2 [ATEX] Hazardous Locations as appropriate to the
Le câblage de ce boîtier doit respecter les méthodes d'installation appropriées en ce
qui concerne les zones dangereuses de la Classe 1 Div. 2, de la Classe 1 Zone 2 et de la
10. Specifications
TPPR-V-1215
Mild Steel
600 x 600 x 300 mm
37 Kg
Do not open when a flammable gas atmosphere is present.
(Class 1 Div.2, Class 1 Zone 2, and Zone 2 [ATEX])
AVERTISSEMENT
(Classe 1 Div.2, Classe 1 Zone 2, et Zone 2 [ATEX])
WARNING: EXPLOSION HAZARD
Zone 2 [ATEX] non-incendive approval.
AVERTISSEMENT: RISQUE D'EXPLOSION
AVERTISSEMENT
-20 to +65 °C (T a ), 0 – 100 %RH (condensing)
-40 to +65 °C (T ) (modules only)
a
100 – 240 VAC, 50/60 Hz, 0 – 20 A max.
24 VDC Nominal (18 – 32 VDC), 0 – 80 A max.
See Rating Plate
WARNING
WARNING
installation.
Zone 2 [ATEX].
146
Touchpoint Pro
Operating Instructions
TPPR-V-1225
Mild Steel
800 x 600 x 300 mm
46 Kg