Equipment Rating Labels (Hazardous Locations) - Honeywell touchpoint Pro Operating Instructions Manual

MAN0923_Issue 3_04/15
1. Safety and Information

1.3.2 Equipment Rating Labels (Hazardous Locations)

The following labels are fixed in prominent positions on the enclosure and on relevant modules. It is the
user's responsibility to check individual rating plates before installation and to ensure that specifications
are not exceeded during operation. Exceeding the approved ratings invalidates product certification and
the manufacturers' warranties.
1
2
3
4
5
6
7
6
8
Figure 5 - Example Remote Wall Mount (Zone 2 Div 2) Rating Label
Note: Similar labels appear on AIM mV, DIM, RCM, ROM Modules and the Backplanes.
Note: The CE mark and Notified Body number 0518 shown on labels does not apply to Type 'n' approval.
11
12
13
14
16
15
Figure 6 - Touchpoint Pro AIM mA Rating Label
15
1. Manufacturer
9
2. Part Number
3. Description
4. ID and Serial Number
10
5. Modification State
6. Safety Warning
7. Ingress Ratings
8. Manufacturer Details
9. Equipment Title
10. Limits for Voltage / Power / T
CE Mark and Notified Body for
11.
Production Supervision
SIRA ATEX / IECEx Certificate
12.
Numbers
ATEX / IECEx Hazardous Area
13.
Certification Details
US/ Canadian Hazardous Location
14.
and Zone Certification Details
Manufacturer's Master Contract
15. Number and Canadian / US
Performance Identification
CSA Monogram Canada and USA
16.
Certified
Touchpoint Pro
Operating Instructions
a