Installing Upgrade Kits - Cisco 12410 Installation And Configuration Manual

Removing and Replacing AC and DC Power Subsystem Components

Installing Upgrade Kits

Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
7-30
When installing a power system upgrade kit, replace the following components:
AC power upgrade (12000/10-AC-UP=):
•
Both power supplies
–
Both PDUs (Removing and Replacing an AC PDU, page
–
DC power upgrade (12000/10-DC-UP=):
•
Both power supplies
–
Both PDUs, the lug covers, and DC trough
–
DC PDU, page
A blower upgrade (not included in the power upgrade kit) is also required
Note
to meet NEBS extended temperature range requirements. To order the
blower upgrade, contact your Cisco representative
(12000/10/16-BLWER=).
(Removing and Replacing an AC PEM, page
(Removing and Replacing a DC PEM, page
7-47)
Chapter 7 Maintaining the Router
7-36)
(Removing and Replacing a
OL-11496-01
7-31)
7-40)