Installing The Router - Cisco 12410 Installation And Configuration Manual

Installing the Router

This chapter contains the procedures to install the router in a rack. The installation
is presented in the following sections:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
OL-11496-01
Pre-Installation Considerations and Requirements, page 3-2
Installation Overview, page 3-3
Removing Components Before Installing the Chassis, page 3-4
Removing Cards from the Chassis, page 3-12
Rack-Mounting the Router Chassis, page 3-17
Supplemental Bonding and Grounding Connections, page 3-28
Reinstalling Components After Installing the Chassis, page 3-29
Reinstalling Cards in the Chassis, page 3-33
Connecting Line Card Network Interface Cables, page 3-36
Connecting GRP Route Processor Cables, page 3-41
Connecting PRP Route Processor Cables, page 3-46
Connecting Alarm Display Card Cables, page 3-50
Connecting Power to the Router, page 3-51
Installing the Front Covers of Cisco 12010 Original Series Routers, page 3-58
This completes the hardware installation procedure for the router. Proceed to
Chapter 4, "System Startup and Basic System Configuration," for
information on performing the initial router startup and basic configuration.,
page 3-59
C H A P T E R
3
3-1