Cisco 12410 Installation And Configuration Manual page 290

Removing and Installing the Front Covers and Bezel Extenders on Original Cisco 12010 Series Routers
Hold the front cover by its outside edges and align the ball studs with the ball stud
Step 5
clips on the front of the chassis
Figure 7-3
Push the front cover into the ball stud clips so that the front cover is flush with the
Step 6
front of the chassis.
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
7-8
(Figure
Attaching the Front Cover Using Bezel Extenders
ALARM A
ALARM B
Chapter 7 Maintaining the Router
7-3).
Ball stud
Ball stud
clip
OL-11496-01