Installing The Front Covers - Cisco 12410 Installation And Configuration Manual

Removing and Installing the Front Covers and Bezel Extenders on Original Cisco 12010 Series Routers

Installing the Front Covers

Step 1
Step 2
Step 3
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
7-4
Refer to Figure 7-1 and use the following procedure to install the front covers.
Hold the front cover by its outside edges and align the ball studs with the ball stud
clips on the front of the chassis.
Push the front cover into the ball stud clips and the front cover is flush with the
front of the chassis.
Repeat Step 1 and Step 2 for the remaining front cover.
Chapter 7 Maintaining the Router
OL-11496-01