Cisco 12410 Installation And Configuration Manual page 256

Troubleshooting the Processor Subsystem
Table 5-3 Troubleshooting Using Alphanumeric Display Messages (continued)
1
Display
IOS
3
FABW
IOS
3
VGET
IOS
RUN
IOS
STRT
IOS
TRAN
IOS
UP
1. The LED initialization sequence shown in
provided in this tabular form as a baseline for how a line card should function at startup.
2. The fabric downloader loads the Cisco IOS software image onto the line card.
3. This LED sequence only appears in Cisco IOS Release 12.0(24)S or later.
Table 5-4 Troubleshooting Using Other Alphanumeric Display Messages
Display
MAL
FUNC
MISM
1
ATCH
PWR
1
STRT
PWR
ON
IN
RSET
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
5-24
Meaning
Cisco IOS software is waiting for the fabric to be ready.
Line card is obtaining the Cisco IOS release.
Line card is enabled and ready for use.
Cisco IOS software is being launched.
Cisco IOS software is transitioning to active.
Cisco IOS software is running.
Table 5-3
Meaning
Line card malfunction reported by field diagnostics.
Line card type mismatch in paired slots.
Line card is newly powered on.
Line card is powered on.
System is resetting.
Chapter 5
may occur too quickly for you to read; therefore, the sequence is
Troubleshooting the Installation
Source
RP IOS software
RP IOS software
RP IOS software
RP IOS software
RP IOS software
RP IOS software
Source
RP
RP
RP
RP
RP
OL-11496-01