Cisco 12410 Installation And Configuration Manual page 135

Chapter 3 Installing the Router
Figure 3-19 Incorrect Lifting Handholds
Position the chassis until the rack-mounting flanges are flush against the
Step 2
mounting rails on the rack (or the optional center-mount brackets, if installed).
Hold the chassis in position against the mounting rails while the second person
Step 3
finger-tightens a screw to the rack rails on each side of the chassis.
Finger-tighten 4 more screws to the rack rails on each side of the chassis.
Step 4
•
Tighten all 5 screws on each side to secure the chassis to the equipment rack.
Step 5
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
OL-11496-01
Space the screws evenly between the top and bottom of the chassis.
Rack-Mounting the Router Chassis
3-27