Viewing The Running Configuration Settings - Cisco 12410 Installation And Configuration Manual

Cisco IOS User Interface

Viewing the Running Configuration Settings

Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
4-30
You can use the show startup-config command to view the current configuration
settings stored in NVRAM.
The following example shows the type of information generated by this command.
Milo# show startup-config
Using 5560 out of 520184 bytes
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Milo
!
enable secret 5 $1$/5HX$OOvyhG2JYhNaCbPa45Wmn/
enable password wilma
ip cef distributed switch
ip host biff 10.3.3.254
!
interface Ethernet0
ip address 10.3.1.1 255.255.0.0
no ip mroute-cache
!
interface POS1/0
ip address 10.1.1.1 255.0.0.0
no keepalive
crc 16
no cdp enable
.
.
.
interface ATM3/0
ip address 10.0.0.15 255.0.0.0 secondary
ip address 10.1.1.2 255.0.0.0
atm pvc 1 0 64 aal5snap
atm pvc 2 0 72 aal5mux ip 155000 155000 1
atm pvc 3 1 90 aal5snap 312000 312000 1
atm pvc 4 0 108 aal5snap
atm pvc 10 0 144 aal5mux ip 155000 155000 1
atm pvc 11 1 91 aal5snap 310000 310000 1
map-group atm1
!
no ip classless
ip route 10.5.4.254 255.255.255.255 Ethernet0
Chapter 4 System Startup and Basic System Configuration
OL-11496-01