Cisco 12410 Installation And Configuration Manual page 347

Chapter 7 Maintaining the Router
Step 2
Figure 7-36 Removing a Card from the Switch Fabric and Alarm Card Cage
Clock scheduler card
Air filter door
Step 3
Step 4
OL-11496-01
Remove the card (a CSC in this example):
Pivot the ejector levers to unseat the card from the backplane connector.
a.
b. Grasp the card by its metal card carrier and slide the card out of the
slot (Figure 7-36).
Place the card directly into an antistatic bag or other ESD-preventive
–
container.
To install the card, reverse the procedure in Step 2.
Close the air filter door and tighten the captive screws.
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
Removing and Replacing Cards from the Chassis
7-65