Troubleshooting the Processor Subsystem
Troubleshooting the Route Processor
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
5-18
When the router is powered on, the alphanumeric display on the RP indicate the
following
(Figure
5-4):
Upper row—Indicates which RP software component is running. At the end
•
of a successful boot process, this display reads MSTR.
•
Lower row—Indicates the current phase of the boot process. At the end of a
successful boot process, this display reads GRP or PRP depending on the RP
type.
Figure 5-4
RP Alphanumeric Display
Chapter 5
Upper alphanumeric
LED display (four digits)
Lower alphanumeric
LED display (four digits)
Troubleshooting the Installation
OL-11496-01