Cisco 12410 Installation And Configuration Manual page 358

Router Specifications
Table A-3
Description
Power
Rated input voltage
Input current rating
Source DC service
requirement
Redundancy
1. For each DC power entry module.
To ensure that the chassis configuration complies with the required power
Caution
budgets, use the on-line power calculator. Failure to properly verify the
configuration may result in an unpredictable state if one of the power units fails.
Contact your local sales representative for assistance.
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
A-4
DC Electrical Specifications
Value
2400 W per DC power entry module (original
series)
2800 W per DC power entry module (enhanced
series)
1
–48 VDC nominal in North America
–60 VDC nominal in the European Community
(range: –40.5 to –72 VDC (–75 VDC FOR 5mS))
–40 VDC to –72 VDC steady-state input voltage
1
60 A maximum (1x)—Original series
40 A maximum (2x)—Enhanced series
Sufficient to supply the rated input current. Local
1
codes apply.
2 DC power entry modules required for 2N
redundancy
Appendix A Technical Specifications
OL-11496-01