2800 W Dc Connections - Cisco 12410 Installation And Configuration Manual

Connecting Power to the Router

2800 W DC Connections

Step 1
Step 2
Warning
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
3-56
Use the following procedure to connect the DC source power cables to a 2800 W
powered router.
Remove the clear plastic safety cover that fits over the DC power connection
terminal studs.
Safety covers for 2800 W PDUs use an upper and lower, 2-piece design.
Note
Connect the 2800 W DC power cables in the following order
Ground cables first.
a.
Positive cables next.
b.
Negative cable last.
c.
Repeat steps a, b, and c for the other PDU.
d.
To prevent injury and damage to the equipment, always attach the ground and
source DC power cable lugs to power shelf terminals in the following order:
(1) ground to ground, (2) positive (+) to positive (+), (3) negative (–) to
negative (–).
Chapter 3 Installing the Router
(Figure 3-35):
OL-11496-01