Cisco 12410 Installation And Configuration Manual page 142

Reinstalling Cards in the Chassis
Step 2
Figure 3-25 Reinstalling a Clock Scheduler Card into the Switch Fabric and Alarm Card Cage
Clock scheduler card
Air filter door
Step 3
Step 4
Caution
Step 5
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
3-34
Starting at slot CSC0:
Slide the card into the slot
d.
a. Pivot the ejector levers to seat the card to the backplane connector.
Repeat Step 2 for each card.
Close the air filter door and tighten the captive screws to prevent the door from
opening during chassis installation.
The air filter door must be closed and secured at all times to maintain correct EMI
performance.
Go to the "Reinstalling Cards in the Line Card and RP Card Cage" section on
page 3-35 to reinstall the line cards and RP.
Chapter 3
(Figure 3-25).
Installing the Router
OL-11496-01