Dc-Powered Routers - Cisco 12410 Installation And Configuration Manual

Hide thumbs Also See for 12410:
Table of Contents

Advertisement

Site Requirement Guidelines

DC-Powered Routers

Note
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
2-16
Table 2-1
lists power cord options. All AC-input power supply power cords
measure 14 feet (4.3 m).
Table 2-1
AC Power Cord International Options
Label
North America
Australia, New Zealand
Europe, Argentina, Brazil
Italy
United Kingdom
Connections to DC PEMs are rated at 60 A maximum. A dedicated,
commensurately rated DC power source is required for each PEM connection.
For DC power cables, we recommend that you use a commensurately rated,
high-strand-count copper wire cable. Connection to the DC power distribution
unit (PDU) requires one earth ground cable and two cable leads; a source DC (–)
and source DC return (+) for each PDU (2 PDUs x 3 = 6 cables).
The length of the cables depends on your router location from the source power.
DC power cables are not available from Cisco, but are available from any
commercial cable vendor.
Chapter 2
Description
20 A, 250 VAC
15 A, 250 VAC
16 A, 250 VAC
16 A, 250 VAC
13 A, 250 VAC
(13 A replaceable fuse)
Preparing for Installation
Part Number
CAB-GSR16-US=
CAB-GSR16-AU=
CAB-GSR16-EU=
CAB-GSR16-IT=
CAB-GSR16-UK=
OL-11496-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

1281012010

Table of Contents