Cisco 12410 Installation And Configuration Manual page 131

Chapter 3 Installing the Router
Identify the orientation of the left and right center-mount brackets
Step 2
Figure 3-15 Center-Mount Brackets
Threaded holes
Install the right center-mount bracket
Step 3
a.
b.
c.
d.
Repeat Step 3 for the left center-mount bracket.
Step 4
Use a level to verify that the tops of the two brackets are level, or use a measuring
Step 5
tape to verify that both brackets are the same distance from the top of the rack
rails.
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
OL-11496-01
to chassis
Left bracket
Align the bottom screw hole of the bracket with the marked screw hole at the
bottom of the rack and finger tighten a screw in that hole.
Finger-tighten a second screw in the top hole of the bracket.
Finger- tighten three more screws in the middle of in the bracket.
Use a screwdriver to tighten all five screws securely.
Open holes
to rack
Right bracket
(Figure 3-16).
Rack-Mounting the Router Chassis
(Figure 3-15).
3-23