Cisco 12410 Installation And Configuration Manual page 320

Removing and Replacing AC and DC Power Subsystem Components
Step 6
Figure 7-20 Removing Rear AC Chassis Components
Rear panel
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
7-38
Remove the rear chassis components
Loosen the (6) captive screws on the AC horizontal trough and remove it.
a.
b. Loosen the (16) captive screws that secure the rear panel to the chassis and
remove it.
Remove the (4) screws securing the AC PDU to the chassis and remove the
c.
PDU.
AC PDUs
AC horizontal trough
Chapter 7
(Figure 7-20):
Maintaining the Router
OL-11496-01