Cisco 12410 Installation And Configuration Manual page 208

Configuring the Software Configuration Register
•
Table 4-8
Bit 12
0
0
1
1
1. Default.
•
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
4-40
Bits 11 and 12 of the software configuration register determine the data
transmission rate of the console terminal.
the four available data transmission rates.
System Console Terminal Data Transmission Rate Settings
Bit 11 Data Transmission Rate (bps)
1
0 9600
1 4800
0 1200
1 2400
Bit 13 of the software configuration register determines the system response
to a bootload failure.
Setting bit 13 causes the system to load Cisco IOS software from flash
–
memory after five unsuccessful attempts to load a boot file from the
network TFTP server.
Clearing bit 13 causes the system to continue attempting to load a boot
–
file from the network TFTP server indefinitely (default).
Chapter 4 System Startup and Basic System Configuration
Table 4-8 shows the bit settings for
OL-11496-01