Installing Upgrade Kits - Cisco 12010 series Maintenance Manual

Chapter 7 Maintaining the Router

Installing Upgrade Kits

OL-11496-01
When installing a power system upgrade kit, replace the following components:
AC power upgrade (12000/10-AC-UP=):
•
Both power supplies
–
Both PDUs (Removing and Replacing an AC PDU, page
–
DC power upgrade (12000/10-DC-UP=):
•
Both power supplies
–
Both PDUs, the lug covers, and DC trough
–
DC PDU, page
A blower upgrade (not included in the power upgrade kit) is also required
Note
to meet NEBS extended temperature range requirements. To order the
blower upgrade, contact your Cisco representative
(12000/10/16-BLWER=).
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
Removing and Replacing AC and DC Power Subsystem Components
(Removing and Replacing an AC PEM, page
(Removing and Replacing a DC PEM, page
7-48)
7-37)
(Removing and Replacing a
7-32)
7-41)
7-31