Maintaining The Router - Cisco 12410 Installation And Configuration Manual

Maintaining the Router

Your router is equipped as ordered and is ready for installation and startup when
it is shipped. As your networking requirements change, you may need to upgrade
the system by adding or changing components. This chapter describes how to
maintain router components.
Procedures for maintaining the router are described in the following sections:
•
•
•
•
•
•
•
•
•
•
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
OL-11496-01
Powering Off the Router, page 7-2
Removing and Installing the Front Covers and Bezel Extenders on Original
Cisco 12010 Series Routers, page 7-3
Removing and Installing the Front Door on Cisco 12010 Enhanced Series
Router, page 7-11
Cleaning or Replacing the Chassis Air Filter, page 7-16
Cleaning or Replacing the Chassis Air Filter, page 7-16
Removing and Replacing the Blower Module, page 7-23
Removing and Replacing AC and DC Power Subsystem Components,
page 7-27
Removing and Replacing Cards from the Chassis, page 7-60
Upgrading the Switch Fabric in the Cisco 12410 Router, page 7-66
Removing and Installing a Chassis, page 7-68
C H A P T E R
7
7-1