Cisco 12410 Installation And Configuration Manual page 346

Removing and Replacing Cards from the Chassis
Removing and Replacing Cards from the Switch Fabric and Alarm
Card Cage
Step 1
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
7-64
The switch fabric and alarm card cage is located behind the air filter door on the
front of the chassis. The card cage has 9 keyed, vertical card slots for the clock
scheduler cards, switch fabric cards, and alarm cards (see
Use the following procedure to remove and replace cards from the switch fabric
and alarm card cage.
Loosen the captive screws on each side of the air filter door and swing the door
away from the switch fabric and alarm card cage
Figure 7-35 Opening the Air Filter Door
Chapter 7 Maintaining the Router
Figure 7-33):
(Figure 7-35).
OL-11496-01