Preparing For Installation - Cisco 12410 Installation And Configuration Manual

Preparing for Installation

Before installing your router, you must consider power and cabling requirements
that must be in place at your installation site, special equipment for installing the
router, and the environmental conditions your installation site must meet to
maintain normal operation. This chapter guides you through the process of
preparing for router installation.
The shipping package for the router is engineered to reduce the chances of product
damage associated with routine material handling experienced during shipment.
•
•
Use the Cisco 12010, Cisco 12410, and Cisco 12810 Router Unpacking
Instructions included with the router to unpack it and inspect all items for
shipping damage. If an item appears damaged, contact a Cisco customer service
representative immediately.
This chapter contains the following installation topics:
•
•
•
•
•
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
OL-11496-01
The router should always be transported or stored in its shipping package in
the upright position.
Keep the router in the shipping container until you have determined the
installation site.
Safety Guidelines, page 2-2
Site Requirement Guidelines, page 2-6
GRP Port Connection Guidelines, page 2-22
PRP Port Connection Guidelines, page 2-33
Alarm Display Connection Guidelines, page 2-42
C H A P T E R
2
2-1