Prp Rj-45 Ethernet Connections - Cisco 12410 Installation And Configuration Manual

Chapter 2 Preparing for Installation

PRP RJ-45 Ethernet Connections

OL-11496-01
The RJ-45 Ethernet connection does not require an external transceiver.
Figure 2-22 shows the pin orientation of the RJ-45 Ethernet port and the modular
cable plug it accepts.
Figure 2-22 RJ-45 Receptacle and Plug
8 7 6 5 4 3 2 1
RJ-45 connector
Table 2-10 lists the RJ-45 pin signals used on the connector.
Table 2-10 PRP RJ-45 Ethernet Receptacle Pinout
Ethernet Port Pin Signal
1 TxD+
2 TxD–
3 RxD+
4 Termination network
5 Termination network
6 RxD–
7 Termination network
8 Termination network
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
PRP Port Connection Guidelines
Description
Transmit data +
Transmit data –
Receive data +
No connection
No connection
Receive data –
No connection
No connection
2-39