Grp Pcmcia Card Slots And Status Leds - Cisco 12410 Installation And Configuration Manual

Chapter 1 Cisco 12010, Cisco 12410, and Cisco 12810 Series Router Overview
Line Card and Route Processor Overview

GRP PCMCIA Card Slots and Status LEDs

Two PCMCIA card slots (slot 0 and slot 1) provide the GRP with additional flash
memory capacity or other input/output (I/O) device capability.
The GRP only supports +5.2 VDC Type I and Type II devices. It does not support
Caution
+3.3 VDC PCMCIA devices.
Status LEDs (Slot-0/Slot-1) indicate when the flash memory card or I/O device in
that slot is accessed. Each slot has an eject button to remove the card from the slot
(Figure 1-10).
Figure 1-10 Slot Activity LEDs—Front Panel
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
1-15
OL-11496-01