Cisco 12410 Installation And Configuration Manual page 36

Physical and Functional Description of Router
Figure 1-6
PWR OK
FAULT
TEMP
•
•
•
For additional information about troubleshooting DC PEMs, see the
"Troubleshooting the DC-Input Power Subsystem" section on page
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
1-8
Chapter 1
DC PEM Status LEDs—2400 W
PW R OK
FAU LT
TE MP
ON
OFF
PWR OK (green)—Indicates that the power supply module is operating
normally.
FAULT (yellow)—Indicates that a fault is detected within the PEM.
TEMP (yellow)—Indicates the PEM is in an overtemperature condition and
shutdown has occurred.
Cisco 12010, Cisco 12410, and Cisco 12810 Series Router Overview
5-8.
OL-11496-01