Configuring Queue Mapping - Zte ZXA10 C300 Configuration Manual

2. In ONU interface configuration mode, apply the queue block profile.
ZXAN(config)#interface gpon-onu_1/5/1:1
ZXAN(config-if)#qos queue-block-profile test vport 1
3. (Optional) Query the QoS queue block profile.
ZXAN(config-if)#show qos queue-block-profile test
-----------------------------------------------------------------
profile name
profile detail
-----------------------------------------------------------------
queue-number
queue-weight
queue-depth
-----------------------------------------------------------------
profile used by :
gpon-onu_1/5/1:1:1
– End of Steps –

7.3.10 Configuring Queue Mapping

Using the queue map profile, you can implement queue mapping on the ONU virtual port
(vport).
Steps
1. In global configuration mode, configure the queue map profile.
ZXAN(config)#qos queue-map-profile test cos-queue-type cos0 2
2. In ONU interface configuration mode, apply the queue map profile.
ZXAN(config)#interface gpon-onu_1/5/1:1
ZXAN(config-if)#qos queue-map-profile test vport 1
3. (Optional) Query the QoS queue map profile.
ZXAN(config-if)#show qos queue-map-profile test
--------------------------------------------------------------
profile name
profile detail :
----------------------------------------
queue-map
queue-number :
cos-value
cos-queue-map:
----------------------------------------
profile used by:
gpon-onu_1/5/1:1:1
– End of Steps –
SJ-20130520164529-007|2013-06-30 (R1.0)
: TEST
:
: 8
: 2 3 0 0 0 0
: 12 12 0 0 0 0
: TEST
: cos-queue-type
8
: 0 1 2 3 4 5
2 1 2 3 4 5
7-13
Chapter 7 QoS Configuration
0 0
0 0
6 7
6 7
ZTE Proprietary and Confidential