Zte ZXA10 C300 Configuration Manual page 67

Optical access convergence equipment
Hide thumbs Also See for ZXA10 C300:
Table of Contents

Advertisement

Psn prop:
Destination Mac Address:
SVlan ID:
CVlan ID:
priority:
Card prop:
Card interface :
Source Mac Address: 0015.EB72.001A
Source IP Address : 192.192.192.24
Note:
When the PW CVLAN is not configured, the ZXA10 C300 allocates a CVLAN ID to the
PW automatically.
8. In ONU interface configuration mode, configure the service port VLAN.
ZXAN(config)#interface gpon-onu_1/5/1:2
ZXAN(config-if)#service-port 1 vport 1 user-vlan 40 vlan 768 svlan 1001
ZXAN(config-if)#exit
9. In ONU remote management mode, configure the ONU CES service channel.
ZXAN(config)#pon-onu-mng gpon-onu_1/5/1:2
ZXAN(gpon-onu-mng)#service tdm gemport 1 cos 7 vlan 40
10. Configure the ONU PW.
a. Configure the PW PSN attributes.
ZXAN(gpon-onu-mng)#pw psn ethernet ces_0/1 switch switch_0/1 dst-mac 0015.eb72.0
01a loopback disable tx-payload-ecid 0x1102 tx-signalling-ecid 0x0 expected-payl
oad-ecid 0x1102 expected-signalling-ecid 0x0 tag-policy tag pri 7 vlan 40
b. Configure the PW TDM attributes.
ZXAN(gpon-onu-mng)#pw tdm ces_0/1 payloadsize 32 payload-delay 2 timing-mode
adaptive-timing
c. Configure the PW RTP parameters.
ZXAN(gpon-onu-mng)#pw rtp ces_0/1 payload-ssrc 3 signalling-ssrc 0 payload-
ptype 97 signalling-ptype 0 expected-payload-ssrc 3 expected-signalling-ssrc 0
expected-payload-ptype 97 expected-signalling-ptype 0 clock-reference 1 rtp-ts-
mode differential
11. Save the configuration data.
– End of Steps –
SJ-20130520164529-007|2013-06-30 (R1.0)
0015.EB72.0001
1001
2304
7
12/1
3-5
Chapter 3 CES Service Configuration
ZTE Proprietary and Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents