Table 4-1 P2P Service Configuration Data - Zte ZXA10 C300 Configuration Manual

ZXA10 C300 Configuration Manual (CLI)

Table 4-1 P2P Service Configuration Data

Item
Data service VLAN ID
Multicast service VLAN ID
VoIP service VLAN ID
Uplink port
Service port
MVLAN working mode
MVLAN group
Steps
1. In uplink interface configuration mode, configure uplink port VLAN.
ZXAN(config)#interface gei_1/15/1
ZXAN(config-if)#switchport vlan 1001,201,301 tag
ZXAN(config-if)#exit
2. In P2P interface configuration mode, configure service port VLAN.
ZXAN(config)#interface gei_1/5/1
ZXAN(config-if)#service-port 1 user-vlan 101 to 124 svlan 1001
ZXAN(config-if)#service-port 2 user-vlan 201 vlan 201
ZXAN(config-if)#service-port 3 user-vlan 301 vlan 301
ZXAN(config-if)#exit
3. (Optional) Enable global IGMP protocol.
ZXAN(config)#igmp enable
By default, the global IGMP protocol is enabled on the ZXA10 C300.
4. Configure IGMP parameters on service port.
ZXAN(config)#interface gei_1/5/1
ZXAN(config-if)#igmp fast-leave enable
ZXAN(config-if)#exit
5. Configure the MVLAN.
ZXAN(config)#igmp mvlan 201
6. (Optional) Configure MVLAN working mode.
ZXAN(config)#igmp mvlan 201 work-mode proxy
SJ-20130520164529-007|2013-06-30 (R1.0)
Note:
Data
CVLAN ID: 101 – 124
SVLAN ID: 1001
201
301
gei_1/15/1
gei_1/5/1
Proxy (default)
224.1.1.1 – 224.1.1.3
4-2
ZTE Proprietary and Confidential