Zte ZXA10 C300 Configuration Manual page 251

ZXAN(config)#mpls ip
7. Configure the LDP target session.
ZXAN(config)#mpls ldp target-session 1.1.1.1
8. Configure the PW.
ZXAN(config)#pw 1and1000pw
ZXAN(config-pw)#mode dynamic pwe3 fec128
ZXAN(config-pw)#pwtype ethernet
ZXAN(config-pw)#peer 1.1.1.1 router-id 1.1.1.1 vcid 1000
ZXAN(config-pw)#exit
9. Configure the PW redundancy group.
à
à
à
10. Configure the VLL.
ZXAN(config)#vll redundancy-vll
ZXAN(config-vll)#mpls xconnect pw 1and1000pw
ZXAN(config-vll)#exit
11. Configure the class map.
ZXAN(config)#class-map classmap1000
ZXAN(config-cmap)#match svlan-id 1000
ZXAN(config-cmap)#exit
12. Configure the CIP.
ZXAN(config)#cip 1
ZXAN(config-cip1)#service-type ethernet class-map classmap1000
ZXAN(config-cip1)#xconnect redundancy-vll
ZXAN(config-cip1)#oam-mapping enable ldp
ZXAN(config-cip1)#exit
13. Save the configuration data.
SJ-20130520164529-007|2013-06-30 (R1.0)
Non-negotiation, revertive, 1:1 mode
You may skip this step.
Non-negotiation, non-revertive, 1+1 mode
You may skip this step.
Negotiation, slave, non-revertive, 1:1 mode
ZXAN(config)#pw-redundancy-group 2and3vcid1000
ZXAN(config-pw-group)#negotiation enable slave
ZXAN(config-pw-group)#protect-type 1by1
ZXAN(config-pw-group)#protect mode non-revertive
ZXAN(config-pw-group)#pw 1and1000pw
ZXAN(config-pw-group)#exit
Chapter 16 MPLS Service Configuration
16-95
ZTE Proprietary and Confidential