Configuring The Mapping Relation From Cos To Local Queues; Olt Interface Qos Configuration; Configuring Queue Scheduling - Zte ZXA10 C300 Configuration Manual

ZXA10 C300 Configuration Manual (CLI)
ZXAN(config)#show qos interface gei_1/21/1
qos traffic-shape rate-limit 1280 bucket-size 512
– End of Steps –

7.1.7 Configuring the Mapping Relation From CoS to Local Queues

This section describes how to configure the mapping relation from the Ethernet packet
CoS to local queues.
Steps
1. In global configuration mode, configure the mapping relation from CoS to local queues.
ZXAN(config)#qos eth-cos-local-map cos0 7 cos1 5 cos2 2 cos3 3 cos4 4 cos5 5
cos6 6 cos7 7
2. (Optional) Query the mapping relation from CoS to local queues.
ZXAN(config)#show qos eth-cos-local-map
-----------------------------------
cos value
queue ID
– End of Steps –

7.2 OLT Interface QoS Configuration

7.2.1 Configuring Queue Scheduling

Using the profile, you can implement queue scheduling on the OLT interface.
Steps
1. In global configuration mode, configure the queue scheduling profile.
ZXAN(config)#qos queue-block-profile test queue0 2 12 queue1 3 12
2. In OLT interface configuration mode, apply the queue scheduling profile.
ZXAN(config)#interface gpon-olt_1/5/1
ZXAN(config-if)#qos queue-block-profile test
3. (Optional) Query the QoS queue scheduling profile.
ZXAN(config)#show qos queue-block-profile test
-----------------------------------------------------------------
profile name
profile detail
-----------------------------------------------------------------
queue-number
queue-weight
queue-depth
SJ-20130520164529-007|2013-06-30 (R1.0)
0 1 2 3 4 5 6
7 5 2 3 4 5 6
: TEST
:
: 8
: 2 3 0 0 0
: 12 12 0 0 0
7-6
7
7
0 0 0
0 0 0
ZTE Proprietary and Confidential