Figure 16-3 Networking Diagram Of Static Lsp Configuration; Table 16-2 Configuration Data Of The Static Lsp - Zte ZXA10 C300 Configuration Manual

ZXA10 C300 Configuration Manual (CLI)

Figure 16-3 Networking Diagram of Static LSP Configuration

The Label Distribution Protocol (LDP) is running on the four ZXA10 C300s. Configure two
static LSPs between C300-1 and C300-3.
The static LSP from C300-1 to C300-3 is: C300-1 > C300-2 > C300-3.
The static LSP from C300-3 to C300-1 is: C300-3 > C300-4 > C300-1.
Configuration Data
Table 16-2

Table 16-2 Configuration Data of the Static LSP

Item
C300-1
SJ-20130520164529-007|2013-06-30 (R1.0)
lists the configuration data of the static LSP.
Loopback interface
L3 interface 1
L3 interface 2
Static LSP (C300-1 to C300-3)
Static LSP (C300-3 to C300-1)
Data
l
ID: 1
l
IP address: 1.1.1.1/32
l
VLAN ID: 10
l
Interface: gei_1/21/1
l
IP address: 10.1.1.1/24
l
VLAN ID: 13
l
Interface: gei_1/21/2
l
IP address: 13.1.1.12/24
l
Destination IP address: 3.3.3.3/32
l
Next hop IP address: 10.1.1.2/24
l
Out label: 1040001
l
Destination IP address: 1.1.1.1/32
l
In label: 1041004
16-6
ZTE Proprietary and Confidential