Zte ZXA10 C300 Configuration Manual page 261

ZXAN(config-pw)#pwtype ethernet
ZXAN(config-pw)#peer 1.1.1.1 router-id 1.1.1.1 vcid 1000
ZXAN(config-pw)#exit
9. Configure the VLL.
ZXAN(config)#vll redundancy-vll
ZXAN(config-vll)#mpls xconnect pw 1and1000pw
ZXAN(config-vll)#exit
10. Configure the class map.
ZXAN(config)#class-map classmap1000
ZXAN(config-cmap)#match svlan-id 1000
ZXAN(config-cmap)#exit
11. Configure the CIP.
ZXAN(config)#cip 1
ZXAN(config-cip1)#service-type ethernet class-map classmap1000
ZXAN(config-cip1)#xconnect redundancy-vll
ZXAN(config-cip1)#oam-mapping enable ldp
ZXAN(config-cip1)#exit
12. Save the configuration data.
Result
When the primary PW is disabled, the secondary PW is activated, and the two CEs can
ping each other successfully.
SJ-20130520164529-007|2013-06-30 (R1.0)
Chapter 16 MPLS Service Configuration
16-105
ZTE Proprietary and Confidential