ZXA10 C300 Configuration Manual (CLI)
Context
When you log in to the ZXA10 C300 through Telnet, the user name and password are
case-sensitive.
Steps
1. In Windows, click Start > Run to display the Run dialog box, as shown in
Figure 1-4 Run Dialog Box
2. In the dialog box, enter Telnet x.x.x.x, where, x.x.x.x is the
Click OK to start the Telnet client.
3. If the connection is proper, the login dialog box is displayed. Enter the user name
(zte) and password ZTEzte123) to enter operator mode (ZXAN>) , and then enter the
enable command and the password to enter administrator mode (ZXAN#), as shown
below.
************************************************
Welcome to ZXAN product C300 of ZTE Corporation
************************************************
Username:zte
Password:
ZXAN>enable
Password:
ZXAN#
– End of Steps –
1.1.3 Login Through NMS
Before logging in to the device through the NMS, install the SQL Server database and the
NetNumen U31 NMS software.
To log in to the NMS, start the SQL Server database, NMS server, and NMS client.
After creating the ZXA10 C300 NE, you can manage the ZXA10 C300 through the NMS.
SJ-20130520164529-007|2013-06-30 (R1.0)
1-4
ZTE Proprietary and Confidential
Figure
1-4.
NE
IP address.