Adding A Card; Table 1-3 Card Configurations For A 19-Inch Shelf - Zte ZXA10 C300 Configuration Manual

ZXA10 C300 Configuration Manual (CLI)
ZXAN(config)#add-shelf shelfno 1 shelftype ETSI_SHELF
The ZXA10 C300 supports only one shelf currently, and thus shelfno can only be 1.
3. (Optional) Query the shelf configuration.
ZXAN(config)#show shelf
Rack
------------------------------------------------------------------------------
1
– End of Steps –
Result
After the shelf is added, the system will automatically add two switching and control cards.
ZXAN(config)#show card
Rack Shelf Slot CfgType RealType Port
----------------------------------------------------------------------------
1 1
1 1

1.3.3 Adding a Card

When replacing the card type during commissioning or capacity expansion, you need to
add a card.
Context
Table 1-3

Table 1-3 Card Configurations for a 19-Inch Shelf

Slot Number
0/1
2–9
10/11
12–17
18
19/20
SJ-20130520164529-007|2013-06-30 (R1.0)
Note:
Shelf ShelfType
1 ETSI_SHELF
10 SCXN SCXN
11 SCXN SCXN
describes the card configurations for a 19-inch shelf.
Card Type
Power card
PON interface card, TDM interface card, Ethernet interface card, and
P2P interface card
Switching and control card
PON interface card, TDM interface card, Ethernet interface card, and
P2P interface card
Common interface card
Uplink card
CleiCode Serial-Number
UNKNOWN 10011001C3000090
000000000000
HardVer SoftVer
4 120900 V2.0.0
4 120900 V2.0.0
1-10
Status
INSERVICE
STANDBY
ZTE Proprietary and Confidential