Adding A User; Table 1-9 User Properties Description - Zte ZXA10 C300 Configuration Manual

Privilege Level
2–9
10–15
• A user whose privilege level is 0 can only use the commands of level 0.
• A user whose privilege level is 1 can only use the commands of level 0–1.
• A user whose privilege level is 2 can only use the commands of level 0–2, and so on.
• A user whose privilege level is 15 can only use the commands of level 0–15.

1.5.1 Adding a User

When you add a user, you need to configure user properties, including the user name,
password and privilege.
Context
Table 1-9

Table 1-9 User Properties Description

Property
Username
Password
Max-session
Privilege
The ZXA10 C300 supports maximum 20 users.
The default user on the ZXA10 C300 is zte, whose password is ZTEzte123, and the
privilege is 1.
Steps
1. Add a user.
ZXAN(config)#username abc password Abc12345 privilege 10
2. (Optional) Query the user configuration.
ZXAN(config)#show username
cli user global configuration
-----------------------------------------------------------------------
name
SJ-20130520164529-007|2013-06-30 (R1.0)
Description
When the user logs in and enters the administrator mode, he can
use the commands of level 0 – 9.
When the user logs in and enters the administrator mode, he can
use the commands of level 0 – 15.
The user can manages user accounts.
describes user properties.
Description
1 – 16 printable characters (no space), case sensitive
The user name must be unique on the ZXA10 C300.
8–32 characters, should contain characters from at l east three
categories: lower-case, capitals, digits or special characters.
Maximum session number, 1 – 16
0 – 15
sessions pri OperStatus login-begin login-end
1-21
ZTE Proprietary and Confidential
Chapter 1 Basic Configuration
expire-date