Table 17-2 Configuration Data Of Lbm Function - Zte ZXA10 C300 Configuration Manual

ZXA10 C300 Configuration Manual (CLI)

Table 17-2 Configuration Data of LBM Function

Item
MD
MA
Local MEP
Remote MEP
Uplink interface
Note:
The remote MAC address of the remote MEP is the in-band MAC address of the local MEP.
Steps
1. Enable the
ZXAN(config)#cfm enable
2. Create the Ethernet OAM MD.
ZXAN(config)#cfm create md session 1 name md1 level 3
3. Create the Ethernet OAM MA.
ZXAN(config-md1)#create ma session 1 format icc-based name ma1
4. Configure the MA protection mode.
ZXAN(config-md1-ma1)#protect vlan
Only VLAN protection mode is valid.
5. Configure the MA primary VLAN.
SJ-20130520164529-007|2013-06-30 (R1.0)
CFM function.
Note:
Data
l Session ID: 1
l Name: md1
l Level: 3
l
Session ID: 1
l Name: ma1
l Protection mode: VLAN protection
l Primary VLAN ID: 100
l Session ID: 1
l MEP ID: 1
l Direction: down
l Session ID: 2
l MEP ID: 2
l Remote MAC address: 00d0.d058.6958
gei_1/21/1
17-4
ZTE Proprietary and Confidential