Zte ZXA10 C300 Configuration Manual page 80

ZXA10 C300 Configuration Manual (CLI)
ZXAN(config)#show igmp mvlan
Total Num is 1.
VID
------------------------------------------------------------------------
200
ZXAN(config)#show igmp mvlan 200
Protocol packet's priority is 0 (in proxy/spr mode)
Act Port is 0.
Host ip is 192.168.2.14.
Proxy ip is 192.168.2.14.
Igmp v1 mode
Igmp v2 mode
Igmp v3 mode
Robustness variable is 2.
General query interval is 125(second).
Query max response time is 100(0.1second).
Last member query interval is 10(0.1second).
Last member query count is 2.
Unsolicited report interval is 1(second).
Startup query interval is 30(second).
Startup query count is 2.
Snooping aging time is 300(second).
-------------------------------------------------------------------------------
Source Port
-------------------------------------------------------------------------------
gei_1/21/1
Receive Port
----------------------------
gpon-onu_1/5/1:1:1
SSM Group Range
----------------------------
232.0.0.0 mask 255.0.0.0
– End of Steps –
SJ-20130520164529-007|2013-06-30 (R1.0)
Status Work-mode GroupFilter Filter-mode ActGroups HostVersion
enable proxy disable
is drop.
is drop.
is accept.
HostCompatibleMode
v3
asmssm 0
HostConfigMode
v3
6-4
ZTE Proprietary and Confidential
v3
V1TimeOut V2TimeOut
0 0