Ethernet Oam Configuration; Configuring The Ccm Function; Table 17-1 Configuration Data Of Ccm Function; Chapter 17 Oam Configuration - Zte ZXA10 C300 Configuration Manual

Chapter 17
OAM Configuration
Table of Contents

Ethernet OAM Configuration.....................................................................................17-1

BFD Configuration....................................................................................................17-7
17.1 Ethernet OAM Configuration
The ZXA10 C300 supports service layer OAM function, which includes link continuity
check, port loopback detection, link trace, and alarm notification.

17.1.1 Configuring the CCM Function

CCM is used to ensures the continuity between MPs in an MA.
Context
A MEG End Point (MEP) sends Continuity Check Message (CCM) packets periodically,
which ensures the continuity of Maintenance Points (MPs) in the corresponding
Maintenance Association (MA). The MPs that receive the packets need not to respond.
Configuration Data
Table 17-1

Table 17-1 Configuration Data of CCM Function

Item
MD
MA
Local MEP
SJ-20130520164529-007|2013-06-30 (R1.0)
list the configuration data of the CCM function.
Data
l
Session ID: 1
l Name: md1
l Level: 3
l
Session ID: 1
l Name: ma1
l Protection mode: VLAN protection
l Primary VLAN ID: 100
l Session ID: 1
l MEP ID: 1
l Direction: down
17-1
ZTE Proprietary and Confidential