2.13 Configuring the GPON Voice Service (SIP)
After you configure the GPON voice service, subscribers can make and answer phone
calls. This section takes the SIP protocol as an example.
Prerequisite
l
The
GPON ONU
l
The T-CONT bandwidth profile has been configured.
l
The GPON
l
The GPON VoIP
l
The GPON
Configuration Data
Table 2-14
Table 2-14 Configuration Data of the GPON Voice Service
Item
Service VLAN ID
Service priority
Uplink port
Service port
T-CONT
GEM Port
Service channel
VoIP protocol
VoIP address
SJ-20130520164529-007|2013-06-30 (R1.0)
has been authenticated.
VoIP IP
profile has been configured.
VLAN
profile has been configured.
SIP
profile has been configured.
lists the configuration data of the GPON voice service.
Chapter 2 GPON/XG-PON Service Configuration
Data
300
7
gei_1/22/1
ONU interface: gpon-onu_1/5/1:1
Service-port ID: 3
Virtual port ID: 3
Index: 3
Name: voip
T-CONT bandwidth profile: 2M
Index: 3
Name: gemport3
T-CONT index: 3
Name: voip-sip
GEM port index: 3
Priority: 7
VLAN ID: 300
SIP
IP address allocation mode: static
VoIP IP profile: ip-test
IP address: 1.2.3.4/24
VoIP VLAN profile: vlan-test
2-23
ZTE Proprietary and Confidential