Configuring The Ndp Line Identification Option (Ndp-Lio); Table 14-4 Configuration Data Of Dhcpv6L2Ra - Zte ZXA10 C300 Configuration Manual

Optical access convergence equipment
Hide thumbs Also See for ZXA10 C300:
Table of Contents

Advertisement

ZXA10 C300 Configuration Manual (CLI)
Configuration Data
Table 14-4

Table 14-4 Configuration Data of DHCPv6L2RA

Item
DHCPv6L2RA VLAN
DHCPv6L2RA interface
Steps
1. Enable DHCPv6L2RA on VLAN.
ZXAN(config)#dhcpv6-l2-relay-agent vlan 100 enable
//VLAN 100 is the service vlan after vlan-translation.
2. In
GPON-ONU
ZXAN(config)#interface gpon-onu_1/5/1:1
ZXAN(config-if)#dhcpv6-l2-relay-agent enable vport 1
ZXAN(config-if)#exit
3. (Optional) Query either the global DHCPv6L2RA status or DHCPv6L2RA status on
VLAN (mutually exclusive).
ZXAN(config)#show dhcpv6-l2-relay-agent vlan all
vlan total
vlan list
4. (Optional) Query the interface configuration of DHCPv6L2RA.
ZXAN(config)#show dhcpv6-l2-relay-agent port gpon-onu_1/5/1:1 vport 1
Port
gpon-onu_1/5/1:1
– End of Steps –
Result
When the subscriber sends DHCPv6 protocol packets, the system adds the following fields
to the packets:
Option 18:
Option 37:
//where, 10 is original user VLAN.

14.1.5 Configuring the NDP Line Identification Option (NDP-LIO)

When NDP-LIO is enabled, the ZXA10 C300 adds LIO field to the upstream NDP packets.
SJ-20130520164529-007|2013-06-30 (R1.0)
lists the configuration data of DHCPv6L2RA.
interface mode, configure DHCPv6L2RA on the virtual port.
: 1
: 100
Pvc dhcpv6-l2-relay-agent status
1
enable
ZXA10-C300/ZTE eth 5/1/1/0/1:10
REMOTE-ID
Data
l
VLAN: 100
l
Status: enable
l
Interface: gpon-onu_1/5/1:1
l
Virtual port: 1
l
DHCPv6L2RA status: enable
14-6
ZTE Proprietary and Confidential
Trust
Policy
false
add

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents