2.8 Configuring the Dial Plan
A dial plan establishes the expected number and pattern of digits for a telephone number,
which includes country codes, access codes, area codes and all combinations of digits
dialed.
Steps
1. In GPON configuration mode, create the dial plan.
ZXAN(config)#gpon
ZXAN(config-gpon)#onu profile dial-plan test
2. Configure the digit-map of the dial plan.
ZXAN(config-gpon)#onu profile dial-plan test digit-map X*.X.#|#X.*.X.##
3. (Optional) Query the dial plan configuration.
ZXAN(config-gpon)#show gpon onu profile dial-plan test
Profile name:
Critical timeout:4000
Partial timeout: 16000
Format:
Digit map:
– End of Steps –
2.9 Configuring the GPON SIP Profile
Using the GPON SIP profile, you can configure the GPON ONU SIP parameters for GPON
ONUs in batches.
Prerequisite
Before this operation, make sure that:
l
The access code profile has been configured.
l
The service application profile has been configured.
l
The dial plan table has been configured.
Configuration Data
Table 2-10
Table 2-10 Configuration Data of the GPON SIP Profile
Item
Profile name
Access code profile
Service application profile
SJ-20130520164529-007|2013-06-30 (R1.0)
test
H.248
X*.X.#|#X.*.X.##
lists the configuration data of the Session Initiation Protocol (SIP) profile.
Chapter 2 GPON/XG-PON Service Configuration
Data
sip-test
abc
voip-service
2-13
ZTE Proprietary and Confidential