Zte ZXA10 C300 Configuration Manual page 287

Note:
When the PTP packet type is multicast, there is no need to configure the PTP source.
3. Enable the 1PPS+TOD function on the ONU interface.
ZXAN(config)#interface gpon-onu_1/5/1:1
ZXAN(config-if)#1pps-tod enable
ZXAN(config-if)#exit
4. Bind the PTP VLAN.
ZXAN(config)#vlan 100
ZXAN(config-vlan100)#1588-bind
ZXAN(config-vlan100)#exit
5. (Optional) Query the PTP configuration.
ZXAN(config)#show time ptp
Slot/
port Mode
................................................................................
10/1 slave 0 192.168.2.11
ptp configure count：1
6. (Optional) Query the PTP source configuration.
ZXAN(config)#show time ptp-source
addr
................................
192.168.2.1
time source count：1
– End of Steps –
SJ-20130520164529-007|2013-06-30 (R1.0)
Hybrid Multi
Domain addr -Mode
syn-hyb
adjust Layer2
0 n
19-7
Chapter 19 Clock Configuration
Two-
cast Step Status Interval
n n freerun
ZTE Proprietary and Confidential
Utc Layer2
-4 1970-01-01 00:35:02 n